カジュアルだがカジュアルではない-[角を曲がる]L。翡翠、ガラス、ビーズなどのビーズ素材xBrass / S925/14KGF。
自動翻訳システムにより、英語表示しています
◆Material: all kinds of natural beads / Brass > S925 > 14KGF
◆Specifications: binaural sum - within 35mm of the axis of the beads / within 24cm of the axis of the wire
Favorite color system)
◇The ear hook is integrated with the shape, and can be freely adjusted for multiple wearing methods; the thread ends are electrically polished and do not scratch the skin.
◇Pairs of earrings with hand-twisted lines, the postures are consistent but not completely symmetrical, please do not order if you mind.
◇Bead material: 2 balls below 10mm / 3 small beads below 6mm / 1 tube bead 15mm...etc.
◇Wire: Brass wire or color-preserving brass wire/S295 sterling silver wire/14K gold-coated wire.
◇Line thickness: The same grade of metal, thick line can be used for short lines, thin lines or an increase in price is required for long lines.
Attention! This page is the L size [customization area] of [Turn a corner],
To order small size S size products of the same series, please go to:
https://tw.creema.net/item/8236949/detail
This design is very simple. The difficulty lies in the angle and symmetry.
can not scratch the metal, nor can there be obvious bending
in the straight arc; several styles.
The total axis length of natural stone beads is less than 35mm, which refers to the superimposed length of two earring beads;
The total length of metal wires is less than 24cm, which refers to the total length of the two earring metal wires.
The difference in price is mainly due to the drop-down selection of different grades of metal wire;
Within the range of the cost difference, and based on the design of a turn,
can customize the design of the turning method and angle, and Bead size and card position.
Because the basic structure is just a turn, and there is no fixed wire such as winding,
must use thicker and harder metal wires to keep the lines concise and not loose.
14K gold-coated wire is hard and expensive.
If the bead material selected is too small, it can be used with 0.64mm wire thickness, which is cheaper;
If the bead material selected is larger than 8mm and heavier, it is recommended to use 0.81mm wire thickness ,
metal lines will be more obvious, but the price is higher.
/////////////////////////////////////////// //////////////////
Spindle:
Bead Material - Ice Transparent Flat Oval Shape Light Amethyst 3 Stacked
Wire - Pure Brass / Single Wire 0.8mm thick 10cm long
Specifications - Wire frame length 5.5cm wide 2cm
Both ends of the bobbin can be worn as ear hooks. Wearing various angles and light and shadow changes, it is quite stylish. The
demo is a larger size according to personal preference, and can be customized in shorter or smaller sizes.
Triangular Spiral:
https://www.facebook.com/Unas.Handmade/posts/620006905417483
Square Spiral:
Bead Material - Apatite 8mm Ball, Tiger Eye 8mm Ball
Wire - Color Retention Brass / single wire thickness 0.81mm length 8cm
specification - wire frame length and width 2cm * 2cm
square spiral has double wearing method - the bead material is suspended below or on the ear.
Circular Spiral:
Material - 8mm Light Amethyst +
The rotation is very large, and it is quite easy to deform when pulled. Therefore,
only accepts orders for thick wires of 0.81mm within the range of wire length specifications. The
round helix can also control how much the metal wire passes through the ear hole to adjust the position of the bead material.
the bead material needs to be fixed slightly in a section, there are turns before and after this section.
who want to DIY can refer to this tutorial:
https://www.facebook.com/notes/unas/528479964570178/
For more photos, please visit:
https://www.facebook.com/pg /Unas.Handmade/photos/?tab=album&album_id=528569667894541
series works:
https://tw.creema.net/listing?q=Unas+Turn a corner
Bead material introduction: https://tw.creema .net/item/5050209/detail
Metal Introduction: https://tw.creema.net/item/5046867/detail
◆Specifications: binaural sum - within 35mm of the axis of the beads / within 24cm of the axis of the wire
Favorite color system)
◇The ear hook is integrated with the shape, and can be freely adjusted for multiple wearing methods; the thread ends are electrically polished and do not scratch the skin.
◇Pairs of earrings with hand-twisted lines, the postures are consistent but not completely symmetrical, please do not order if you mind.
◇Bead material: 2 balls below 10mm / 3 small beads below 6mm / 1 tube bead 15mm...etc.
◇Wire: Brass wire or color-preserving brass wire/S295 sterling silver wire/14K gold-coated wire.
◇Line thickness: The same grade of metal, thick line can be used for short lines, thin lines or an increase in price is required for long lines.
Attention! This page is the L size [customization area] of [Turn a corner],
To order small size S size products of the same series, please go to:
https://tw.creema.net/item/8236949/detail
This design is very simple. The difficulty lies in the angle and symmetry.
can not scratch the metal, nor can there be obvious bending
in the straight arc; several styles.
The total axis length of natural stone beads is less than 35mm, which refers to the superimposed length of two earring beads;
The total length of metal wires is less than 24cm, which refers to the total length of the two earring metal wires.
The difference in price is mainly due to the drop-down selection of different grades of metal wire;
Within the range of the cost difference, and based on the design of a turn,
can customize the design of the turning method and angle, and Bead size and card position.
Because the basic structure is just a turn, and there is no fixed wire such as winding,
must use thicker and harder metal wires to keep the lines concise and not loose.
14K gold-coated wire is hard and expensive.
If the bead material selected is too small, it can be used with 0.64mm wire thickness, which is cheaper;
If the bead material selected is larger than 8mm and heavier, it is recommended to use 0.81mm wire thickness ,
metal lines will be more obvious, but the price is higher.
/////////////////////////////////////////// //////////////////
Spindle:
Bead Material - Ice Transparent Flat Oval Shape Light Amethyst 3 Stacked
Wire - Pure Brass / Single Wire 0.8mm thick 10cm long
Specifications - Wire frame length 5.5cm wide 2cm
Both ends of the bobbin can be worn as ear hooks. Wearing various angles and light and shadow changes, it is quite stylish. The
demo is a larger size according to personal preference, and can be customized in shorter or smaller sizes.
Triangular Spiral:
https://www.facebook.com/Unas.Handmade/posts/620006905417483
Square Spiral:
Bead Material - Apatite 8mm Ball, Tiger Eye 8mm Ball
Wire - Color Retention Brass / single wire thickness 0.81mm length 8cm
specification - wire frame length and width 2cm * 2cm
square spiral has double wearing method - the bead material is suspended below or on the ear.
Circular Spiral:
Material - 8mm Light Amethyst +
The rotation is very large, and it is quite easy to deform when pulled. Therefore,
only accepts orders for thick wires of 0.81mm within the range of wire length specifications. The
round helix can also control how much the metal wire passes through the ear hole to adjust the position of the bead material.
the bead material needs to be fixed slightly in a section, there are turns before and after this section.
who want to DIY can refer to this tutorial:
https://www.facebook.com/notes/unas/528479964570178/
For more photos, please visit:
https://www.facebook.com/pg /Unas.Handmade/photos/?tab=album&album_id=528569667894541
series works:
https://tw.creema.net/listing?q=Unas+Turn a corner
Bead material introduction: https://tw.creema .net/item/5050209/detail
Metal Introduction: https://tw.creema.net/item/5046867/detail
お支払い方法
- クレジットカード
- 銀行振込み
- コンビニ
- d払い(ドコモ)
- auかんたん決済
- ソフトバンクまとめて支払い
- ワイモバイルまとめて支払い
発送元地域:
海外配送方法
配送方法 | 追跡/補償 | 送料 |
追加送料
×
1人のクリエイターから複数作品を購入した場合に |
---|---|---|---|
海外配送 | ○ / ✕ |
¥0
|
|
海外配送 | ○ / ○ |
¥0
|
発送目安日:お支払い後7日以内
¥1,931
残り[10点]
4人購入
8
|
|
ギフトラッピング 不可 | オーダーメイド 可
いくつかの候補の中から、好みのものを選べたので安心です。