カジュアルだがカジュアルではない-[角を曲がる]S。翡翠、ガラス、ビーズ、その他のビーズ素材xBrass / S925/14KG
自動翻訳システムにより、英語表示しています
◆Material: all kinds of natural beads / Brass > S925 > 14KGF
◆Specification: binaural sum - within 25mm of the axis of the beads / within 12cm of the axis of the wire
Favorite color system)
◇The ear hook is integrated with the shape, and can be freely adjusted for multiple wearing methods; the thread ends are electrically polished and do not scratch the skin.
◇Pairs of earrings with hand-twisted lines, the postures are consistent but not completely symmetrical, please do not order if you mind.
◇Bead material: 1 ball below 8mm / 3 small beads below 4mm / 1 tube bead 12mm...etc.
◇Wire: Brass wire or color-preserving brass wire/S295 sterling silver wire/14K gold-coated wire.
◇Line thickness: The same grade of metal, thick line can be used for short lines, thin lines or an increase in price is required for long lines.
Attention! This page is the S size [customization area] of [Turn a corner],
To order large size L size products of the same series, please go to:
https://tw.creema.net/item/7932871/detail
This design is very simple. The difficulty lies in the angle and symmetry.
can not scratch the metal, nor can there be obvious bending
in the straight arc; several styles.
The total axis length of natural stone beads is less than 25mm, which refers to the superimposed length of two earring beads;
The total length of metal wires is less than 12cm, which refers to the total length of the two earring metal wires.
The difference in price is mainly due to the drop-down selection of different grades of metal wire;
Within the range of the cost difference, and based on the design of a turn,
can customize the design of the turning method and angle, and Bead size and card position.
Because the basic structure is just a turn, and there is no fixed wire such as winding,
must use thicker and harder metal wires to keep the lines concise and not loose.
14K gold-coated wire is hard and expensive.
If the bead material selected is too small, it can be used with 0.64mm wire thickness, which is cheaper;
If the bead material selected is larger than 8mm and heavier, it is recommended to use 0.81mm wire thickness ,
metal lines will be more obvious, but the price is higher.
/////////////////////////////////////////// //////////////////
Spindle:
Beads - Autumn
3
Specifications - The wire frame is 3cm long and 1.5cm wide.
Both ends of the bobbin can be worn as ear hooks.
wears various angles and light and shadow changes, which is quite stylish.
Square Spiral:
Bead Material - Hetian White Jade 6mm,
Stone 5mm, Lapis
6mm
Square Spirals are available in double wear - the bead material dangles underneath or on the ear.
Triangular Spiral:
Bead Material - 15mm Malachite Tube Bead
Wire - Color Preserving Brass Wire
Long 6cm Underneath or on-ear.
Round Spiral:
Bead Material - 7mm Violet Mica
Wire - Color Retaining Brass Wire Thickness 0.81mm Length 6cm
Specifications - Wire Frame Length 2.2cm Width 1.8cm
Round Helix can also control the wire to pass through the ear hole How much to adjust the position of the bead material.
If the bead material is not in the innermost circle, it must be fixed in a section with a turning point before and after.
who want to DIY can refer to this tutorial:
https://www.facebook.com/notes/unas/528479964570178/
For more photos, please visit:
https://www.facebook.com/pg /Unas.Handmade/photos/?tab=album&album_id=528569667894541
series works:
https://tw.creema.net/listing?q=Unas+Turn a corner
Bead material introduction: https://tw.creema .net/item/5050209/detail
Metal Introduction: https://tw.creema.net/item/5046867/detail
◆Specification: binaural sum - within 25mm of the axis of the beads / within 12cm of the axis of the wire
Favorite color system)
◇The ear hook is integrated with the shape, and can be freely adjusted for multiple wearing methods; the thread ends are electrically polished and do not scratch the skin.
◇Pairs of earrings with hand-twisted lines, the postures are consistent but not completely symmetrical, please do not order if you mind.
◇Bead material: 1 ball below 8mm / 3 small beads below 4mm / 1 tube bead 12mm...etc.
◇Wire: Brass wire or color-preserving brass wire/S295 sterling silver wire/14K gold-coated wire.
◇Line thickness: The same grade of metal, thick line can be used for short lines, thin lines or an increase in price is required for long lines.
Attention! This page is the S size [customization area] of [Turn a corner],
To order large size L size products of the same series, please go to:
https://tw.creema.net/item/7932871/detail
This design is very simple. The difficulty lies in the angle and symmetry.
can not scratch the metal, nor can there be obvious bending
in the straight arc; several styles.
The total axis length of natural stone beads is less than 25mm, which refers to the superimposed length of two earring beads;
The total length of metal wires is less than 12cm, which refers to the total length of the two earring metal wires.
The difference in price is mainly due to the drop-down selection of different grades of metal wire;
Within the range of the cost difference, and based on the design of a turn,
can customize the design of the turning method and angle, and Bead size and card position.
Because the basic structure is just a turn, and there is no fixed wire such as winding,
must use thicker and harder metal wires to keep the lines concise and not loose.
14K gold-coated wire is hard and expensive.
If the bead material selected is too small, it can be used with 0.64mm wire thickness, which is cheaper;
If the bead material selected is larger than 8mm and heavier, it is recommended to use 0.81mm wire thickness ,
metal lines will be more obvious, but the price is higher.
/////////////////////////////////////////// //////////////////
Spindle:
Beads - Autumn
3
Specifications - The wire frame is 3cm long and 1.5cm wide.
Both ends of the bobbin can be worn as ear hooks.
wears various angles and light and shadow changes, which is quite stylish.
Square Spiral:
Bead Material - Hetian White Jade 6mm,
Stone 5mm, Lapis
6mm
Square Spirals are available in double wear - the bead material dangles underneath or on the ear.
Triangular Spiral:
Bead Material - 15mm Malachite Tube Bead
Wire - Color Preserving Brass Wire
Long 6cm Underneath or on-ear.
Round Spiral:
Bead Material - 7mm Violet Mica
Wire - Color Retaining Brass Wire Thickness 0.81mm Length 6cm
Specifications - Wire Frame Length 2.2cm Width 1.8cm
Round Helix can also control the wire to pass through the ear hole How much to adjust the position of the bead material.
If the bead material is not in the innermost circle, it must be fixed in a section with a turning point before and after.
who want to DIY can refer to this tutorial:
https://www.facebook.com/notes/unas/528479964570178/
For more photos, please visit:
https://www.facebook.com/pg /Unas.Handmade/photos/?tab=album&album_id=528569667894541
series works:
https://tw.creema.net/listing?q=Unas+Turn a corner
Bead material introduction: https://tw.creema .net/item/5050209/detail
Metal Introduction: https://tw.creema.net/item/5046867/detail
お支払い方法
- クレジットカード
- 銀行振込み
- コンビニ
- d払い(ドコモ)
- auかんたん決済
- ソフトバンクまとめて支払い
- ワイモバイルまとめて支払い
発送元地域:
海外配送方法
配送方法 | 追跡/補償 | 送料 |
追加送料
×
1人のクリエイターから複数作品を購入した場合に |
---|---|---|---|
海外配送 | ○ / ✕ |
¥0
|
|
海外配送 | ○ / ○ |
¥0
|
発送目安日:お支払い後7日以内
¥1,430
残り[9点]
1人購入
8
|
|
ギフトラッピング 不可 | オーダーメイド 可
いくつかの候補の中から、好みのものを選べたので安心です。