ハンドエッチングシリーズ手鍛造とノック真鍮プレート皿─マンダラマンダラ(受注生産)
自動翻訳システムにより、英語表示しています
Hand-etched series hand-forged and knocked brass shallow dish ─ Mandala
◇ ◆ This model is currently sold and can be made to order; if you want to customize the size, the price will be adjusted according to the size, please order after the message is communicated Thank you ◆ ◇
Material:
brass etched, round diameter 7cm, about 0.3 cm high
About the pattern [Know the Mandala] Mandala
Mandala means "sacred circle" in Sanskrit, commonly found in Tibetan Buddhism and Hinduism.
Through the process of creating the mandala, you reach a state of meditation, return to the present and the present, and feel the connection and expansion with the universe and inner self, and then achieve the integration and perfection of the soul.
Western psychologist Jung has also created a large number of mandalas, discovered the connection between the mandala and the self, and studied many cases to determine the subtle response of the mandala to the inner potential and the core of self personality. According to Jung, Datura can integrate personal consciousness and subconsciousness, and it can also apply Datura's technique to the theories and methods of art therapy. The small universe presented by Datura is exactly the specific and innate nature of the individual soul, and Datura reveals more Images and experiences shared by all humans.
About the technique [Metal Forging] Metal Raising
's metalworking technique is to use metal characteristics-plastic deformation, to make metal sheets into a three-dimensional shape.
After annealing, external force hammering must be applied repeatedly during the metal forming process. In the struck area, the metal structure is compressed. The compression phenomenon causes the metal to shrink or extend, and then shapes the metal sheet.
About Techniques [Metal Etching]
is a metalworking technique that uses a solvent to corrode metal to form a relief effect on the surface.
the copper sheet is cut and repaired, the pattern is thermally transferred to the copper tire, and then immersed in a solvent for etching; during the process, the copper tire surface must be picked up every ten minutes, at least so repeatedly It takes three hours to make a beautiful embossed pattern.
three hours, cleaning, pickling, sanding, and sometimes welding pendants, braided necklaces and other items to make necklaces, key rings or earrings, etc. can be truly completed. It can be said that hand-etched works are The scores of years.
Each piece will be blessed with frankincense and myrrh smoke and purified before being shipped.
The process is purely handmade. Every procedure is attentive and meditation. Each piece of work is a blessing to share, and a blessing to you ~
◇ ◆ This model is currently sold and can be made to order; if you want to customize the size, the price will be adjusted according to the size, please order after the message is communicated Thank you ◆ ◇
Material:
brass etched, round diameter 7cm, about 0.3 cm high
About the pattern [Know the Mandala] Mandala
Mandala means "sacred circle" in Sanskrit, commonly found in Tibetan Buddhism and Hinduism.
Through the process of creating the mandala, you reach a state of meditation, return to the present and the present, and feel the connection and expansion with the universe and inner self, and then achieve the integration and perfection of the soul.
Western psychologist Jung has also created a large number of mandalas, discovered the connection between the mandala and the self, and studied many cases to determine the subtle response of the mandala to the inner potential and the core of self personality. According to Jung, Datura can integrate personal consciousness and subconsciousness, and it can also apply Datura's technique to the theories and methods of art therapy. The small universe presented by Datura is exactly the specific and innate nature of the individual soul, and Datura reveals more Images and experiences shared by all humans.
About the technique [Metal Forging] Metal Raising
's metalworking technique is to use metal characteristics-plastic deformation, to make metal sheets into a three-dimensional shape.
After annealing, external force hammering must be applied repeatedly during the metal forming process. In the struck area, the metal structure is compressed. The compression phenomenon causes the metal to shrink or extend, and then shapes the metal sheet.
About Techniques [Metal Etching]
is a metalworking technique that uses a solvent to corrode metal to form a relief effect on the surface.
the copper sheet is cut and repaired, the pattern is thermally transferred to the copper tire, and then immersed in a solvent for etching; during the process, the copper tire surface must be picked up every ten minutes, at least so repeatedly It takes three hours to make a beautiful embossed pattern.
three hours, cleaning, pickling, sanding, and sometimes welding pendants, braided necklaces and other items to make necklaces, key rings or earrings, etc. can be truly completed. It can be said that hand-etched works are The scores of years.
Each piece will be blessed with frankincense and myrrh smoke and purified before being shipped.
The process is purely handmade. Every procedure is attentive and meditation. Each piece of work is a blessing to share, and a blessing to you ~
お支払い方法
- クレジットカード
- 銀行振込み
- コンビニ
- d払い(ドコモ)
- auかんたん決済
- ソフトバンクまとめて支払い
- ワイモバイルまとめて支払い
発送元地域:
海外Sold
¥11,337
1人購入
1
ギフトラッピング 無料 | オーダーメイド 可
お支払い後18日以内