Comandante C40 MK3 MK4 本体 レザーケース 素材パック
自動翻訳システムにより、英語表示しています
Xiaogong has always been a lover of hand-brewed coffee, but unfortunately, he couldn't find a C40 protective case he liked on the market, so he developed it himself, and I hope you will like it.
uses the slightly stretchable properties of leather to cover the body with leather and use the same method of tying shoelaces to completely cover the body, and everyone can quickly complete it in the easiest way. The sewing method is the same as that of tying shoelaces. Make one more circle at the beginning and end. When sewing, you need to tighten the edge of the seam. When you wrap the circle at the end, apply white glue to tighten it. Cut the thread and press the thread end. flat.
The following is a small work method.
1. First, wrap the wire around the first hole twice, and adjust the left and right ends of the wire to be about the same length
- Right hole
3. Carry out step 2, pass the left end line through the second row of holes in sequence Right hole - Left hole
4. Then repeat point 2.3
in sequence 5. When it reaches the last hole, do the same as in step 1
the method and wrap it twice,
the thread into white glue and
it until it is dry and cut the thread. You can try the feeling after changing the color. The color of the leather thread can be customized. The thread color is troublesome to inform in the order. In addition, the leather surface can be purchased with hot stamping / laser engraving / or choose to open your own LOGO (additional quotation) hot stamping
For additional purchases, please refer to
https://tw.creema.net/item/5894257/detail
For laser carving, please refer to
https://tw.creema.net/item/2670782/detail
uses the slightly stretchable properties of leather to cover the body with leather and use the same method of tying shoelaces to completely cover the body, and everyone can quickly complete it in the easiest way. The sewing method is the same as that of tying shoelaces. Make one more circle at the beginning and end. When sewing, you need to tighten the edge of the seam. When you wrap the circle at the end, apply white glue to tighten it. Cut the thread and press the thread end. flat.
The following is a small work method.
1. First, wrap the wire around the first hole twice, and adjust the left and right ends of the wire to be about the same length
- Right hole
3. Carry out step 2, pass the left end line through the second row of holes in sequence Right hole - Left hole
4. Then repeat point 2.3
in sequence 5. When it reaches the last hole, do the same as in step 1
the method and wrap it twice,
the thread into white glue and
it until it is dry and cut the thread. You can try the feeling after changing the color. The color of the leather thread can be customized. The thread color is troublesome to inform in the order. In addition, the leather surface can be purchased with hot stamping / laser engraving / or choose to open your own LOGO (additional quotation) hot stamping
For additional purchases, please refer to
https://tw.creema.net/item/5894257/detail
For laser carving, please refer to
https://tw.creema.net/item/2670782/detail
¥3,436
残り[10点]
3
|
|
ギフトラッピング 不可 | オーダーメイド 可
ありがとうございました。