3952 Old Goat-Naluwan イタリアン ブライヤー 高解像度 高輝度 ローズゴールド カリグラフィー スチールチ
自動翻訳システムにより、英語表示しています
Naluwan, our beautiful hometown, has a large and elegant style. Generally, Italian briar is used in the production of pipes. The old goat specially selects the briar burr, which is like the luster of the wood grain trim in a high-end car. , but the heather has inevitable sunspots, because it is the part of the plucking tree, so each section has more or less. The pattern of the tree bump car is complex and magnificent. After countless spraying, grinding, and polishing, the light can be seen, and the hand feel is particularly thick. Under the transparent paint of the "high-definition high-bright polishing technique", it is even more textured. Most of them on the market are polished or waxed, and there are very few treatments like this kind of thick work. (There are special sunspots and natural textures, which are shipped randomly).
The special barrel-shaped pen cap design uses a special version of rose gold-plated steel nib. The brand specially made #250 (#6) rose gold-colored steel nib as requested by the original German factory. It has been hand-made by an old goat and adjusted to be writable. The change of the thickness ratio has the charm of the calligraphy, the feel is different, and it is more elastic than the general steel tip. Grey chrome plated fittings, swivel cap design.
Commodity combination bonus: German-made k2 ink absorber (without ink) + 3952 old goat gift box + special gift of a leather pen case hand-sewn by a Taiwanese master (rare leather case with inner lining)
will not take the initiative to respond to environmental protection Provide paper bags, if you have any needs, please take the initiative to inform us in the remarks, thank you.
Product Specifications
Size:
Length: 154mm
Cap Outer Diameter 17mm
Pen Body with Tip Length 130mm
Pen Body Outer Diameter
Weight:
Write on the right side, so as not to accidentally cause the dislocation of the iridium point to cause the phenomenon of scraping the end of the paper.
Hand-adjusted calligraphy tip
1. The general recommendation for writing calligraphy tip is to soak in ink for a period of time and then use an ink absorber.
2. If you use the ink absorber, the ink will be broken. Look at the angle of the hand-held tip. The left and right iridium dots should fall on the paper at the same time. Do not write on one side. The ink will break again to see if the nib is jammed with paper fiber dander.
3. Unplug the ink absorber and try to ink.
4. Wash the pen tip first. If you write on the left and right iridium dots on one side and press the tip hard, it will easily cause the iridium dots to dislocate, that is, there is a height difference between the left and right, which will scrape the paper and accumulate paper scraps in the sharp seam.
5. The calligraphy tip is made of EF. The tip is adjusted to a curved tip, and the thickness is not written by pressing the tip, but by the angle of holding the pen, and using the arc of the tip of the pen to write the thickness. Hold the pen straighter, the junction area between the nib and the paper is small, and the lines you write will be thinner.
The picture is for reference only, the product is a single
The special barrel-shaped pen cap design uses a special version of rose gold-plated steel nib. The brand specially made #250 (#6) rose gold-colored steel nib as requested by the original German factory. It has been hand-made by an old goat and adjusted to be writable. The change of the thickness ratio has the charm of the calligraphy, the feel is different, and it is more elastic than the general steel tip. Grey chrome plated fittings, swivel cap design.
Commodity combination bonus: German-made k2 ink absorber (without ink) + 3952 old goat gift box + special gift of a leather pen case hand-sewn by a Taiwanese master (rare leather case with inner lining)
will not take the initiative to respond to environmental protection Provide paper bags, if you have any needs, please take the initiative to inform us in the remarks, thank you.
Product Specifications
Size:
Length: 154mm
Cap Outer Diameter 17mm
Pen Body with Tip Length 130mm
Pen Body Outer Diameter
Weight:
Write on the right side, so as not to accidentally cause the dislocation of the iridium point to cause the phenomenon of scraping the end of the paper.
Hand-adjusted calligraphy tip
1. The general recommendation for writing calligraphy tip is to soak in ink for a period of time and then use an ink absorber.
2. If you use the ink absorber, the ink will be broken. Look at the angle of the hand-held tip. The left and right iridium dots should fall on the paper at the same time. Do not write on one side. The ink will break again to see if the nib is jammed with paper fiber dander.
3. Unplug the ink absorber and try to ink.
4. Wash the pen tip first. If you write on the left and right iridium dots on one side and press the tip hard, it will easily cause the iridium dots to dislocate, that is, there is a height difference between the left and right, which will scrape the paper and accumulate paper scraps in the sharp seam.
5. The calligraphy tip is made of EF. The tip is adjusted to a curved tip, and the thickness is not written by pressing the tip, but by the angle of holding the pen, and using the arc of the tip of the pen to write the thickness. Hold the pen straighter, the junction area between the nib and the paper is small, and the lines you write will be thinner.
The picture is for reference only, the product is a single
お支払い方法
- クレジットカード
- 銀行振込み
- コンビニ
- d払い(ドコモ)
- auかんたん決済
- ソフトバンクまとめて支払い
- ワイモバイルまとめて支払い
発送元地域:
海外配送方法
配送方法 | 追跡/補償 | 送料 |
追加送料
×
1人のクリエイターから複数作品を購入した場合に |
---|---|---|---|
海外配送 | ○ / ✕ |
発送目安日:お支払い後3日以内
此商品預計付款後2至3天發送(不包含假日)。
¥27,388
残り[10点]
0
|
ギフトラッピング 無料 | オーダーメイド 不可