【受注生産】ステゴサウルス 縮小全身骨格レプリカ 1/20スケール
本商品は受注後に制作を開始いたします。
本商品はステゴサウルスの1/20縮小全身骨格レプリカです。元データから1/20サイズで3Dプリントしています。
下記の商用利用可能なデータを3Dプリントできるよう改変して使用しています。
https://sketchfab.com/3d-models/stegosaurus-skeleton-dc6e1c748484449587b81426d41da6cb
本データの説明(上記URLより引用)
This Stegosaurus skeleton from the Denver Museum of Nature & Science is more than 26 feet long and over nine feet tall. The bony beast is a permanent display with steel shaped around it, welded in place, and puttied together, making it impossible to take apart. Which means it was super difficult to scan! Triebold Paleontology, Inc. scanned the dinosaur using Artec Space Spider and Artec Studio software. The scanning involved crawling into the rib cage, then perching atop a step ladder just to reach the peaks of the big fan-shaped plates on the dinosaur’s back. The scanner captured everything from the nose to the tail spikes. Beyond aligning the scans, Artec Studio also reduced the mesh size to the desired level for manipulating the 3D model and 3D printing. Scanning time: 1 week - Processing time: 2 months (629 individual scans across 71 scan projects).
【商品の情報】
・サイズ:約W35×D17×H17センチ(台座込みの大きさ)
・重量 :約155g(台座込み)
・台座のサイズ:W20×D10×H2センチ
(台座から模型がはみ出ている部分がございます。)
・模型は長く安定して飾っていただくため、ハリガネで台座に固定してお届けいたします。
【制作方法】
素材には光硬化型の樹脂を使用しています。
光造形式の3Dプリンターで出力後に化石色に着色しています。
【納期】
ご注文をいただいてからの製作となり、一つ一つ手塗りで製作するためお届けまで2週間いただきます。
また、色味や模様については商品写真と少し異なる場合もございます。
ご了承ください。
【商品の説明】
ブランド・メーカー:アンフィ合同会社(https://amphillc.com)
※アンフィ合同会社以外の販売サイト名で取り扱われている場合はアンフィ合同会社までお問い合わせください。この販売ページはアンフィ合同会社のクリーマ販売サイトです。
本商品はステゴサウルスの1/20縮小全身骨格レプリカです。元データから1/20サイズで3Dプリントしています。
下記の商用利用可能なデータを3Dプリントできるよう改変して使用しています。
https://sketchfab.com/3d-models/stegosaurus-skeleton-dc6e1c748484449587b81426d41da6cb
本データの説明(上記URLより引用)
This Stegosaurus skeleton from the Denver Museum of Nature & Science is more than 26 feet long and over nine feet tall. The bony beast is a permanent display with steel shaped around it, welded in place, and puttied together, making it impossible to take apart. Which means it was super difficult to scan! Triebold Paleontology, Inc. scanned the dinosaur using Artec Space Spider and Artec Studio software. The scanning involved crawling into the rib cage, then perching atop a step ladder just to reach the peaks of the big fan-shaped plates on the dinosaur’s back. The scanner captured everything from the nose to the tail spikes. Beyond aligning the scans, Artec Studio also reduced the mesh size to the desired level for manipulating the 3D model and 3D printing. Scanning time: 1 week - Processing time: 2 months (629 individual scans across 71 scan projects).
【商品の情報】
・サイズ:約W35×D17×H17センチ(台座込みの大きさ)
・重量 :約155g(台座込み)
・台座のサイズ:W20×D10×H2センチ
(台座から模型がはみ出ている部分がございます。)
・模型は長く安定して飾っていただくため、ハリガネで台座に固定してお届けいたします。
【制作方法】
素材には光硬化型の樹脂を使用しています。
光造形式の3Dプリンターで出力後に化石色に着色しています。
【納期】
ご注文をいただいてからの製作となり、一つ一つ手塗りで製作するためお届けまで2週間いただきます。
また、色味や模様については商品写真と少し異なる場合もございます。
ご了承ください。
【商品の説明】
ブランド・メーカー:アンフィ合同会社(https://amphillc.com)
※アンフィ合同会社以外の販売サイト名で取り扱われている場合はアンフィ合同会社までお問い合わせください。この販売ページはアンフィ合同会社のクリーマ販売サイトです。
送料無料
¥15,000
残り[5点]
1人購入
4
|
ギフトラッピング 不可 | オーダーメイド 可