Ni.kouスターリングシルバートライアングルリング
●Material: 925 sterling silver
●Size: width is about 2mm, thickness is about 1.5mm, ring can be customized, please measure your international size after measurement,
can also be typed, if you need to type, please also note Give the designer a yo!
●Measurement method and comparison table
more accurate way is
directly to the silver building. The jewelry store asks the clerk to help measure the international size.
Method 2
Place your ring on the ruler, measure the diameter inside the ring, and compare the table below.
https://c1.staticflickr.com/1/373/32161964524_54854f31d6_o.png
mode three
use inelastic thin line ** pull to the tightest ** around a circle to wear the finger at the widest point (joint) length, then Comparing to the ruler is the circumference of the inner circumference. (Because each person's measurement method may vary, the error will be larger.)
reminder:
If your joint is wider than your finger, please use the joint size.
Try to measure your finger in the evening, so the time is the biggest finger.
average person has left and right hands, and the size of the finger will vary.
Because your fingers will expand and contract, avoid measuring your fingers cold or touching hot water to avoid inaccurate measurements.
●Up to 10 words (including spaces and symbols)
This ring can be typed in the inner ring
●Font 1mm, English uppercase font "ABC...Z" and the number "0~9"
symbol limited to " . " " ">
https://c2.staticflickr.com/1/268/31606094201_5f9430d639_o.jpg
●**Please confirm the size and alphanumeric before ordering. There are no returns for the products! **
This item is "order-to-order" and will only be produced after payment. It will take an average of 7 production days (excluding holidays and delivery time).
●Because the goods are handmade, there will be traces of hand-made, such as asymmetry, typing interval or typing force, etc. There is no way to be as perfect as a machine, the size and the knocking will be slightly different from the photo, or The inner diameter of the circle will have an error of +/- 3mm, and the acceptor can place an order again.
●After the modification
If you need to modify the ring, you will be charged the modification fee and the return shipping fee. Please refer to the following instructions for the modification fee. Please return the ring package and transfer the fee.
✽ 围 : ::
first time in the 1 ring, one will provide the first modification free
0.5 ~ 3 rings, one modification fee NT$100
3.5 ~ 6 ring , one modification fee NT$200
6 rings or more will not be modified
✽ 围 改 改:
first time within 1 ring, one will provide the first modification free
0.5 (inclusive), One modification fee NT$200
: If it has been modified once and the second time is changed to 1 ring, it is not in the free qualification
● Repair
silver chain part is not repaired, and the jewelry part is to be repaired. Please provide pictures to discuss with the designer, depending on the damage status quote, you need to pay for the return shipping.
●About our hand-made jewelry
We only use 925 sterling silver and pure copper. Each hand-made jewelry,
metalworking traditional techniques - sawing, knocking, carving, welding, boring, setting, throwing, etc. Finished,
retains the texture of the hand that is welded and forged.
●Maintenance knowledge
1. All accessories, regardless of the material, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemical products, etc., will seriously damage the jewelry to produce oxidation, so should try to Avoid and stay away.
2. Jewelry is recommended to wear frequently, and the body's oil can make the jewelry produce a natural and lustrous beauty.
3. Jewelry will oxidize, vulcanize or oxidize yellow and black signs over time. Use a moist soft toothbrush to apply a toothpaste or toothpaste to the surface, or use a silver cloth or a copper cloth to wipe the original. Some metal luster.
4. If the jewelry is specially vulcanized, do not over-wipe it to avoid the vulcanization design disappearing.
5. If you are worried that the chemical emulsion of silver cloth and copper cloth will cause skin irritation, you can rinse it off and dry it before wearing it.
6. Natural stone, crystal and pearl can be washed with water and then with a soft cloth.
7. When not worn, clean and put in a sealed bag to reduce the oxidation rate.
8. Do not put all kinds of accessories in the same jewelry box. The hardness of the jewelry will rub against each other and cause wear and tear.
9. Never use any other tools to clean your accessories. It will leave scratches on the surface of the jewelry. If a brush is necessary, use a clean or very soft brush to brush your jewelry.
Origin / manufacturing methods
Made in Taiwan handmade
●Size: width is about 2mm, thickness is about 1.5mm, ring can be customized, please measure your international size after measurement,
can also be typed, if you need to type, please also note Give the designer a yo!
●Measurement method and comparison table
more accurate way is
directly to the silver building. The jewelry store asks the clerk to help measure the international size.
Method 2
Place your ring on the ruler, measure the diameter inside the ring, and compare the table below.
https://c1.staticflickr.com/1/373/32161964524_54854f31d6_o.png
mode three
use inelastic thin line ** pull to the tightest ** around a circle to wear the finger at the widest point (joint) length, then Comparing to the ruler is the circumference of the inner circumference. (Because each person's measurement method may vary, the error will be larger.)
reminder:
If your joint is wider than your finger, please use the joint size.
Try to measure your finger in the evening, so the time is the biggest finger.
average person has left and right hands, and the size of the finger will vary.
Because your fingers will expand and contract, avoid measuring your fingers cold or touching hot water to avoid inaccurate measurements.
●Up to 10 words (including spaces and symbols)
This ring can be typed in the inner ring
●Font 1mm, English uppercase font "ABC...Z" and the number "0~9"
symbol limited to " . " " ">
https://c2.staticflickr.com/1/268/31606094201_5f9430d639_o.jpg
●**Please confirm the size and alphanumeric before ordering. There are no returns for the products! **
This item is "order-to-order" and will only be produced after payment. It will take an average of 7 production days (excluding holidays and delivery time).
●Because the goods are handmade, there will be traces of hand-made, such as asymmetry, typing interval or typing force, etc. There is no way to be as perfect as a machine, the size and the knocking will be slightly different from the photo, or The inner diameter of the circle will have an error of +/- 3mm, and the acceptor can place an order again.
●After the modification
If you need to modify the ring, you will be charged the modification fee and the return shipping fee. Please refer to the following instructions for the modification fee. Please return the ring package and transfer the fee.
✽ 围 : ::
first time in the 1 ring, one will provide the first modification free
0.5 ~ 3 rings, one modification fee NT$100
3.5 ~ 6 ring , one modification fee NT$200
6 rings or more will not be modified
✽ 围 改 改:
first time within 1 ring, one will provide the first modification free
0.5 (inclusive), One modification fee NT$200
: If it has been modified once and the second time is changed to 1 ring, it is not in the free qualification
● Repair
silver chain part is not repaired, and the jewelry part is to be repaired. Please provide pictures to discuss with the designer, depending on the damage status quote, you need to pay for the return shipping.
●About our hand-made jewelry
We only use 925 sterling silver and pure copper. Each hand-made jewelry,
metalworking traditional techniques - sawing, knocking, carving, welding, boring, setting, throwing, etc. Finished,
retains the texture of the hand that is welded and forged.
●Maintenance knowledge
1. All accessories, regardless of the material, are afraid of moisture, especially rain, sweat, perfume, bathing hot springs, chemical products, etc., will seriously damage the jewelry to produce oxidation, so should try to Avoid and stay away.
2. Jewelry is recommended to wear frequently, and the body's oil can make the jewelry produce a natural and lustrous beauty.
3. Jewelry will oxidize, vulcanize or oxidize yellow and black signs over time. Use a moist soft toothbrush to apply a toothpaste or toothpaste to the surface, or use a silver cloth or a copper cloth to wipe the original. Some metal luster.
4. If the jewelry is specially vulcanized, do not over-wipe it to avoid the vulcanization design disappearing.
5. If you are worried that the chemical emulsion of silver cloth and copper cloth will cause skin irritation, you can rinse it off and dry it before wearing it.
6. Natural stone, crystal and pearl can be washed with water and then with a soft cloth.
7. When not worn, clean and put in a sealed bag to reduce the oxidation rate.
8. Do not put all kinds of accessories in the same jewelry box. The hardness of the jewelry will rub against each other and cause wear and tear.
9. Never use any other tools to clean your accessories. It will leave scratches on the surface of the jewelry. If a brush is necessary, use a clean or very soft brush to brush your jewelry.
Origin / manufacturing methods
Made in Taiwan handmade
展示
1人購入
9