販売〜錫合金ジュエリー低融点合金タッド
自動翻訳システムにより、英語表示しています
1 Category
① Lead-based or tin-based bearing alloy. With lead-based bearing alloy collectively referred to as Babbitt. Antimony 3% ~ 15%, copper 3% ~ 10%, and some alloy varieties also contain 10% lead. Antimony, copper to improve the strength and hardness of the alloy. The friction coefficient of small, good toughness, thermal conductivity and corrosion resistance, mainly used to make sliding bearings.
② lead-tin solder. Tin-lead alloy-based, some tin solder also contains a small amount of antimony. 38.1% lead alloy commonly known as solder, melting point of about 183 ℃, for the electrical instrumentation industry components welding, as well as automotive radiators, heat exchangers, food and beverage containers sealed.
③ pewter coating. The use of tin alloy corrosion resistance, it will be applied to a variety of electrical components surface, both protective and decorative. Commonly used tin-lead, tin-nickel coating.
④ Pewter (including pewter, lead-free alloy) can be used to make all kinds of fine alloy jewelry, alloy crafts such as rings, necklaces, bracelets, earrings, brooches, buttons, tie clips, caps and ornaments , Alloy photo frame, religious emblem, mini statues, souvenirs and so on.
2 Features
1. Tin-lead alloy with stable properties, low melting point, good fluidity and low shrinkage.
2. Lead-tin alloy grain fine, good toughness, suitable for soft and hard, smooth surface, no sand hole, no defects, no cracks, polishing and plating effect.
3. Pewter alloy centrifugal casting performance, toughness, casting complex shape, thin-walled precision parts, casting surface smooth.
4. Pewter products can be surface treated: electroplating, spraying, painting.
5. Pb-Sn alloy crystal structure is compact, the casting material to ensure that the small size tolerances, the surface is fine, post-processing flaw less
simple ion in the acidic electrolyte, pewter at very low current density Resulting in co-deposition of lead-tin alloy coating than the same thickness of lead plating and tin coating porosity is low.It contains 60% tin, lead 40% lead-tin alloy with the lowest eutectic point of 183 ° C, its welding performance far exceeds pure Tin coating.Therefore, it has been widely used in aerospace and electronics industries, with stable performance, low melting point, good fluidity and small shrinkage. Fine grain, good toughness, suitable for soft and hard, smooth surface, no sand hole, no defects, no cracks, polishing and plating effect.
3 Uses
Ideal for decoration, high plasticity.
4 How to buy
Five groups sold.
① Lead-based or tin-based bearing alloy. With lead-based bearing alloy collectively referred to as Babbitt. Antimony 3% ~ 15%, copper 3% ~ 10%, and some alloy varieties also contain 10% lead. Antimony, copper to improve the strength and hardness of the alloy. The friction coefficient of small, good toughness, thermal conductivity and corrosion resistance, mainly used to make sliding bearings.
② lead-tin solder. Tin-lead alloy-based, some tin solder also contains a small amount of antimony. 38.1% lead alloy commonly known as solder, melting point of about 183 ℃, for the electrical instrumentation industry components welding, as well as automotive radiators, heat exchangers, food and beverage containers sealed.
③ pewter coating. The use of tin alloy corrosion resistance, it will be applied to a variety of electrical components surface, both protective and decorative. Commonly used tin-lead, tin-nickel coating.
④ Pewter (including pewter, lead-free alloy) can be used to make all kinds of fine alloy jewelry, alloy crafts such as rings, necklaces, bracelets, earrings, brooches, buttons, tie clips, caps and ornaments , Alloy photo frame, religious emblem, mini statues, souvenirs and so on.
2 Features
1. Tin-lead alloy with stable properties, low melting point, good fluidity and low shrinkage.
2. Lead-tin alloy grain fine, good toughness, suitable for soft and hard, smooth surface, no sand hole, no defects, no cracks, polishing and plating effect.
3. Pewter alloy centrifugal casting performance, toughness, casting complex shape, thin-walled precision parts, casting surface smooth.
4. Pewter products can be surface treated: electroplating, spraying, painting.
5. Pb-Sn alloy crystal structure is compact, the casting material to ensure that the small size tolerances, the surface is fine, post-processing flaw less
simple ion in the acidic electrolyte, pewter at very low current density Resulting in co-deposition of lead-tin alloy coating than the same thickness of lead plating and tin coating porosity is low.It contains 60% tin, lead 40% lead-tin alloy with the lowest eutectic point of 183 ° C, its welding performance far exceeds pure Tin coating.Therefore, it has been widely used in aerospace and electronics industries, with stable performance, low melting point, good fluidity and small shrinkage. Fine grain, good toughness, suitable for soft and hard, smooth surface, no sand hole, no defects, no cracks, polishing and plating effect.
3 Uses
Ideal for decoration, high plasticity.
4 How to buy
Five groups sold.
展示
0