No 3 鳥インコ - あみぐるみ・鳥・インコ・木のスタンド付き 手作り かぎ針
No 3 鳥インコ - あみぐるみ・鳥・インコ・木のスタンド付き 手作り かぎ針
頭から足の細部まで丁寧に編みました。リビングや玄関、寝室に自然を感じさせてくれると思います!長さは約15cm、幅は約6cmです。足はワイヤーでできているので、自立することができます。ですがワイヤーですので小さなお子様にはご注意ください。写真をご覧になり、詳細をご確認ください。
スタンドはレーザーカッターで作成しました。ご自分での組み立てが必要になります。しっかりとはまるように設計しているので、接着剤なしですぐ組み立てられます。私の方での組み立てをご希望の場合は、ご注文時にオプションとしてお選びください。
詳細
スタンド-レーザーカット木製スタンド
鳥-アクリル毛糸/ウール/綿/ワイヤー
ご不明な点がございましたら、いつでもお気軽にメッセージを送ってください!
This is a very detailed and realistic handmade crochet bird. I think it would make a great display piece and brings a sense of nature into your house! The bird is about 15cm long and 6cm wide. The legs are made out of wire so the bird is able to stand up by itself. Because there is wire I do not recommend it for small children. Please look at the photos to see all the details properly.
The stand is laser cut and will require some self assembly. I have designed it to fit together tightly so you should be able to assemble it quickly and without glue. If you would like the stand assembled by me please select it as an option when ordering.
Details
Stand - Laser Cut wooden stand
Bird - acrylic yarn/wool/cotton/wire
If you have any questions please feel free to send me a message any time!
頭から足の細部まで丁寧に編みました。リビングや玄関、寝室に自然を感じさせてくれると思います!長さは約15cm、幅は約6cmです。足はワイヤーでできているので、自立することができます。ですがワイヤーですので小さなお子様にはご注意ください。写真をご覧になり、詳細をご確認ください。
スタンドはレーザーカッターで作成しました。ご自分での組み立てが必要になります。しっかりとはまるように設計しているので、接着剤なしですぐ組み立てられます。私の方での組み立てをご希望の場合は、ご注文時にオプションとしてお選びください。
詳細
スタンド-レーザーカット木製スタンド
鳥-アクリル毛糸/ウール/綿/ワイヤー
ご不明な点がございましたら、いつでもお気軽にメッセージを送ってください!
This is a very detailed and realistic handmade crochet bird. I think it would make a great display piece and brings a sense of nature into your house! The bird is about 15cm long and 6cm wide. The legs are made out of wire so the bird is able to stand up by itself. Because there is wire I do not recommend it for small children. Please look at the photos to see all the details properly.
The stand is laser cut and will require some self assembly. I have designed it to fit together tightly so you should be able to assemble it quickly and without glue. If you would like the stand assembled by me please select it as an option when ordering.
Details
Stand - Laser Cut wooden stand
Bird - acrylic yarn/wool/cotton/wire
If you have any questions please feel free to send me a message any time!
お支払い方法
- クレジットカード
- 銀行振込み
- コンビニ
- d払い(ドコモ)
- auかんたん決済
- ソフトバンクまとめて支払い
- ワイモバイルまとめて支払い
発送元地域:
東京都海外発送:
不可配送方法
配送方法 | 追跡/補償 | 送料 |
追加送料
×
1人のクリエイターから複数作品を購入した場合に |
---|---|---|---|
佐川急便 | ○ / ✕ |
¥600
|
¥0
|
¥5,000以上のご購入で送料無料となります
発送目安日:お支払い後2日以内
Sold
¥4,000
1人購入
8
ギフトラッピング 不可 | オーダーメイド 可
お支払い後2日以内
大切にします。ありがとうございました。